Загрузка...
До Нового Года осталось совсем немного..! Уже расписывает календарь. Поздравляю с наступающим Новым годом. Желаю, чтобы вместе с праздником в дверь постучались счастье, достаток, мир и любовь. Желаю, чтобы этот год был успешным, добрым, благополучным и удачным. Желаю, чтобы повсюду сопутствовали крупное везение и чудесное вдохновение.!!!
УВАЖАЕМЫЕ ПОЛЬЗОВАТЕЛИ ФОРУМА! ПОЖАЛУЙСТА, ПОМОГИТЕ НАМ ПОДДЕРЖИВАТЬ ГАРМОНИЮ В НАШЕМ СООБЩЕСТВЕ. БУДЬТЕ ВЕЖЛИВЫ, НИКОГО НЕ ОСКОРБЛЯЙТЕ И НЕ ИСПОЛЬЗУЙТЕ НЕНОРМАТИВНУЮ ЛЕКСИКУ. ОТВЕЧАЙТЕ НА СООБЩЕНИЯ КОНСТРУКТИВНО И ЦИВИЛИЗОВАННО. ПОМНИТЕ, У КАЖДОГО ЕСТЬ СВОЕ МНЕНИЕ И ДОВОДЫ. ПРЕДУПРЕЖДАЕМ, ЧТО АГРЕССИВНЫЕ, ПРОВОКАЦИОННЫЕ И ГРУБЫЕ ВЫСКАЗЫВАНИЯ БУДУТ УДАЛЯТЬСЯ. НИКОГДА НЕ ОТВЕЧАЙТЕ НА ПОДОБНЫЕ СООБЩЕНИЯ ПУБЛИЧНО И СТАВЬТЕ В ИЗВЕСТНОСТЬ О НИХ МОДЕРАТОРОВ И СУПЕРМОДЕРАТОРОВ. УБЕДИТЕЛЬНАЯ ПРОСЬБА СОЗДАВАТЬ НА ФОРУМЕ ТОЛЬКО АКТУАЛЬНЫЕ ТЕМЫ И НЕ ПУБЛИКОВАТЬ ПРОСРОЧЕННУЮ ИНФОРМАЦИЮ. C УВАЖЕНИЕМ, АДМИНИСТРАЦИЯ ФОРУМА GSMFORUMAZ.NET...! GSMForumAz -а X O S - G E L M I S I N I Z..!======================================Д О Б Р О - П О Ж А Л О В А Т Ь на GSMForumAz.net..!====================================/span>W E L C O M E to GSMForumAz.net..! УВАЖАЕМЫЕ ГОСТИ И ПОЛЬЗОВАТЕЛИ ! НА ФОРУМЕ ЗАПУЩЕНА СИСТЕМА АВТОМАТИЧЕСКОГО ОПРЕДЕЛЕНИЯ СТРАНЫ ПО IP. УБЕДИТЕЛЬНАЯ ПРОСЬБА ПРИ РЕГИСТРАЦИИ УКАЗЫВАТЬ РЕАЛЬНОЕ МЕСТОНАХОЖДЕНИЕ,ИНАЧЕ БУДЕТ БАН ПО IP. C УВАЖЕНИЕМ, АДМИНИСТРАЦИЯ ФОРУМА GSMFORUMAZ.NET...! DEAR GUESTS AND USERS, ON THE FORUM WE HAVE LAUNCHED THE SYSTEM WHICH AUTOMATICALLY DETERMINES THE COUNTRY USING YOUR IP. PLEASE, MAKE SURE THAT YOU PROVIDE YOUR CURRENT LOCATION DURING THE REGISTRATION PROCESS. OTHERWISE, YOUR IP WILL BE BLOCKED (BANNED)... BEST REGARDS, THE FORUM ADMINISTRATOR GSMFORUMAZ.NET..!
Показано с 1 по 6 из 6
  1. #1
    Новичок
    Флаг страны для Armkar
    Аватар для Armkar
    Armkar

    Регистрация
    26.08.2016
    Возраст
    39
    Сообщений
    9
    Сказал(а) спасибо
    6
    Поблагодарили 19 раз(а) в сообщениях
    Вес репутации
    0

    Volcano Box Обновления


    • VolcanoBox 3.0 A.K.A. INFERNO MTK V1.0G
      • Released For VolcanoBox Users
      • Released For Merapi Users
      • Released For Inferno Key Users

    >>>>> What's new in VolcanoBox 3.0 Aka Inferno MTK_V1.0G ? <<<<<


    • World's 1st Added Support for Qmobile 3G5
    • World's 1st Added Support for Qmobile 3G5
    • Added Nand Yaffs Phones usb Write Flash
    • Added Support for NAND New Flash id of MTK6571
    • Fix MTK6575 NAND dsp_bl.bin Failed when User Flash via Pre-Loader
    • Revise MTK Nand Factory file
    • Improve Factory file read, Size reduce


    Вложения Вложения

  2. 2 пользователя(ей) сказали cпасибо:
    roman66 (01.09.2016)Ulugbek (23.07.2017)
  3. #2
    Новичок
    Флаг страны для Armkar
    Аватар для Armkar
    Armkar

    Регистрация
    26.08.2016
    Возраст
    39
    Сообщений
    9
    Сказал(а) спасибо
    6
    Поблагодарили 19 раз(а) в сообщениях
    Вес репутации
    0

    • VolcanoBox 3.0 A.K.A. INFERNO MTK V1.0H
      • Released For VolcanoBox Users
      • Released For Merapi Users
      • Released For Inferno Key Users


    What's new in VolcanoBox 3.0 Aka Inferno MTK_V1.0H


    • > Added New Flash Support for MTK6750


    • > Added New Flash Support for MTK6755
    • > Added New Function "Format Before Flash"
    Вложения Вложения

  4. 3 пользователя(ей) сказали cпасибо:
    kamyl (28.09.2016)roman66 (05.09.2016)Ulugbek (23.07.2017)
  5. #3
    Новичок
    Флаг страны для Armkar
    Аватар для Armkar
    Armkar

    Регистрация
    26.08.2016
    Возраст
    39
    Сообщений
    9
    Сказал(а) спасибо
    6
    Поблагодарили 19 раз(а) в сообщениях
    Вес репутации
    0
    VolcanoBox MTK V1.0N

    • Released For VolcanoBox Users
    • Released For Merapi Users
    • Released For Inferno Key Users


    What's new in VolcanoBox MTK_V1.0N
    VolcanoBox 3.0 A.K.A. INFERNO MTK V1.0N

    Цитата:
    • Added read extended info from system(sparse file).
    • Modify log style of write factory.
    • Fixed Mobile Ram info value while Connecting Mobile.
      • Now you can see How much Ram is in your phone..


    • Added Charging Mode after any operation.
      • After Read Flash, Write flash, Format etc. your mobile will be in Charging Mode. No need to Disconnect battery and insert again.
      • it's very usefull for those phones which have Built-in batteries


    • Improved & Fixed Analise preloader failed with NAND 6575.
    • Fixed after reset pin lock infero still hang on pause.
    Вложения Вложения

  6. 2 пользователя(ей) сказали cпасибо:
    roman66 (23.10.2016)Ulugbek (23.07.2017)
  7. #4
    Пользователь
    Флаг страны для Бахтияр
    Аватар для Бахтияр
    Бахтияр

    Регистрация
    05.06.2017
    Возраст
    37
    Сообщений
    263
    Сказал(а) спасибо
    94
    Поблагодарили 366 раз(а) в сообщениях
    Вес репутации
    29
    VolcanoBox UniTool 1.4.0 World's 1st Added Huawei E5573cs-609 ver 21.323.014.01.274

    What's new in VolcanoBox UniTool 1.4.0 ?

    Цитата:
    World's 1st Added Huawei Modem E5573cs-609
    Firmware ver 21.323.014.01.274
    Fix Huawei Modem E5573s-320 Patch Flash
    Fix Huawei Modem E5573s-320 Erase Flash
    Fix Huawei Modem E5330s-B2 Patch Flash.
    User have to Patch once then reconnect it and Patch flash again and do not reconnect it just patch flash Again to make device work.
    Added Expert Mode for SECURE Phones
    Use Expert Mode to Select Manually "DA" & "Auth" & "Preloader" to work on those devices which are Secured as well as not supported.
    Solved some MT6580 were not boot.
    ReDownload HWModem.SYS from Support Area Index of ./VolcanoBox/Volcano_Inferno_Updates/Inferno_UniTool_Module_Updates/HWModem.SYS/
    Paste HWModem.SYS into Inferno Unitool Folder
    Complete list of Modem & Frimeware Supported.
    E5330S-B2
    21.210.21.XX.274
    21.210.21.XX.306
    21.210.21.XX.1065
    21.210.25.XX.274
    21.210.25.XX.306
    21.210.25.XX.1065
    E8231-S1
    22.618.13.XX.274
    22.618.13.XX.1065
    22.618.13.XX.306
    22.618.17.XX.274
    22.618.17.XX.1065
    22.618.17.XX.306
    E5573CS-609
    21.318.XX.XX.274
    21.323.00.00.274
    21.323.014.01.274
    E8372H-608
    21.316.01.01.274
    21.316.01.02.274
    21.316.01.03.274
    21.316.01.04.274
    E5573CS-322
    21.318.XX.XX.306
    21.323.XX.XX.306
    E8372H-153
    21.313.XX.XX.306
    21.318.XX.XX.306
    21.321.XX.XX.306
    E5573S-320
    21.315.01.00.306
    21.315.01.01.306
    Download Area

  8. Пользователь сказал cпасибо:
    roman66 (01.10.2017)
  9. #5
    Пользователь
    Флаг страны для Бахтияр
    Аватар для Бахтияр
    Бахтияр

    Регистрация
    05.06.2017
    Возраст
    37
    Сообщений
    263
    Сказал(а) спасибо
    94
    Поблагодарили 366 раз(а) в сообщениях
    Вес репутации
    29
    VolcanoBox Inferno UniTool 1.4.1 Huawei Modems & Custom Partition by Logical Block


    What's new in VolcanoBox Inferno UniTool 1.4.1
    Added New way to Manage Custom Partition by Logical Block Address for Advance Users only !!
    Added Erase for Huawei E8372h-153 -> 21.313.xx.xx.306
    Fixed some VIVO phones not detecting by selecting Auto cpu.
    How to Unlock Huawei Modems with Inferno ?
    Open Inferno UniTool 1.4.1
    Go to Huawei -> Modem
    Connect Huawei Modem in usb
    in Normal mode
    Click on Read info.
    make sure you have installed Correct Drivers
    Check software ver inside your modem.
    go to back and select Erase and then select carefully your Modem model & Firmware ver
    Firmware ver you checked from Read Info.
    Check List Below which Modem & Ver Required Erase
    Connect Test Point
    Check List Below which Modem & Ver Required Testpoint
    you can download all Test Points from here https://www.mediafire.com/folder/ysz...ems_Test_point
    Make Sure in Device Manger have one Huawei port !!
    Write Huawei Modem Port number into Unitool Erase windows and click on next. it will Erase successfully.
    it will automatically reboot after successfully Erased
    in device manager it will show 2 ports after successfully Erased.
    Go to Huawei -> Modem -> Patch flash -> Select Modem Model & Firmware ver
    Select Same Modem & Firmware ver which you selected while Erasing & which was in modem before erase.
    click on Next and let it patch flash.
    After Patch Flash success, please look at list what operation needed for POST PATCH Flash.
    Some Modems need to Unlock by Inferno Unitool Unitool. V4 Unlock button. after patch flash
    Some modems need to repair Imei by Inferno UniTool
    Some modems need to Code calculate.
    You must update your modem Firmware to LATEST Firmware to run super fine.
    Make sure you Repair Wifi
    Kindly have a look at list below for each modems model.
    You have to Download HWModem.sys and Place into Inferno Unitool Folder


    Complete Details of each ver & steps you have to do while unlock



    Model:

    Model: E5330s-B2
    Supported Ver: 21.210.21.xx.274
    Test Point: No
    Erase: No
    Patch Flash: Yes
    Unlock Command: No Need
    Imei Repair Command: No Need
    Note: After Patch Flash User Have To Calculate "Huawei Modem V3" Unlock Code from VolcanoBox 3.1.0 or from any website and enter into Modem by putting Wrong Sim Card into Modem.



    Model: E5330s-B2
    Supported Ver: 21.210.21.xx.306
    Test Point: No
    Erase: No
    Patch Flash: Yes
    Unlock Command: No Need
    Imei Repair Command: No Need
    Note: After Patch Flash User Have To Calculate "Huawei Modem V3" Unlock Code from VolcanoBox 3.1.0 or from any website and enter into Modem by putting Wrong Sim Card into Modem.



    Model: E5330s-B2
    Supported Ver: 21.210.21.xx.1065
    Test Point: No
    Erase: No
    Patch Flash: Yes
    Unlock Command: No Need
    Imei Repair Command: No Need
    Note: After Patch Flash User Have To Calculate "Huawei Modem V3" Unlock Code from VolcanoBox 3.1.0 or from any website and enter into Modem by putting Wrong Sim Card into Modem.



    Model: E5330s-B2
    Supported Ver: 21.210.25.xx.274
    Test Point: Yes
    Erase: Yes
    Patch Flash: Yes
    Unlock Command: No Need
    Imei Repair Command: No Need
    Note: Make Patch Flash Twice
    Note2: After Patch Flash User Have To Calculate "Huawei Modem V3" Unlock Code from VolcanoBox 3.1.0 or from any website and enter into Modem by putting Wrong Sim Card into Modem.



    Model: E5330s-B2
    Supported Ver: 21.210.25.xx.306
    Test Point: Yes
    Erase: Yes
    Patch Flash: Yes
    Unlock Command: No Need
    Imei Repair Command: No Need
    Note: Make Patch Flash Twice
    Note2: After Patch Flash User Have To Calculate "Huawei Modem V3" Unlock Code from VolcanoBox 3.1.0 or from any website and enter into Modem by putting Wrong Sim Card into Modem.



    Model: E5330s-B2
    Supported Ver: 21.210.25.xx.1065
    Test Point: Yes
    Erase: Yes
    Patch Flash: Yes
    Unlock Command: No Need
    Imei Repair Command: No Need
    Note: Make Patch Flash Twice
    Note2: After Patch Flash User Have To Calculate "Huawei Modem V3" Unlock Code from VolcanoBox 3.1.0 or from any website and enter into Modem by putting Wrong Sim Card into Modem.



    Model: E8231-S1
    Supported Ver: 22.618.13.xx.274
    Test Point: No
    Erase: No
    Patch Flash: Yes
    Unlock Command: No Need
    Imei Repair Command: No Need
    Note: After Patch Flash User Have To Calculate "Huawei Modem V3" Unlock Code from VolcanoBox 3.1.0 or from any website and enter into Modem by putting Wrong Sim Card into Modem.



    Model: E8231-S1
    Supported Ver: 22.618.13.xx.1065
    Test Point: No
    Erase: No
    Patch Flash: Yes
    Unlock Command: No Need
    Imei Repair Command: No Need
    Note: After Patch Flash User Have To Calculate "Huawei Modem V3" Unlock Code from VolcanoBox 3.1.0 or from any website and enter into Modem by putting Wrong Sim Card into Modem.



    Model: E8231-S1
    Supported Ver: 22.618.13.xx.306
    Test Point: No
    Erase: No
    Patch Flash: Yes
    Unlock Command: No Need
    Imei Repair Command: No Need
    Note: After Patch Flash User Have To Calculate "Huawei Modem V3" Unlock Code from VolcanoBox 3.1.0 or from any website and enter into Modem by putting Wrong Sim Card into Modem.



    Model: E8231-S1
    Supported Ver: 22.618.17.xx.274
    Test Point: Yes
    Erase: Yes
    Patch Flash: Yes
    Unlock Command: No Need
    Imei Repair Command: No Need
    Note: Make Patch Flash Twice
    Note2: After Patch Flash User Have To Calculate "Huawei Modem V3" Unlock Code from VolcanoBox 3.1.0 or from any website and enter into Modem by putting Wrong Sim Card into Modem.



    Model: E8231-S1
    Supported Ver: 22.618.17.xx.1065
    Test Point: Yes
    Erase: Yes
    Patch Flash: Yes
    Unlock Command: No Need
    Imei Repair Command: No Need
    Note: Make Patch Flash Twice
    Note2: After Patch Flash User Have To Calculate "Huawei Modem V3" Unlock Code from VolcanoBox 3.1.0 or from any website and enter into Modem by putting Wrong Sim Card into Modem.



    Model: E8231-S1
    Supported Ver: 22.618.17.xx.306
    Test Point: Yes
    Erase: Yes
    Patch Flash: Yes
    Unlock Command: No Need
    Imei Repair Command: No Need
    Note: Make Patch Flash Twice
    Note2: After Patch Flash User Have To Calculate "Huawei Modem V3" Unlock Code from VolcanoBox 3.1.0 or from any website and enter into Modem by putting Wrong Sim Card into Modem.



    Model: E5573cs-609
    Supported Ver: 21.318.xx.xx.274
    Test Point: Yes
    Erase: Yes
    Patch Flash: Yes
    Unlock Command: at^nvwrex=8268,0,12,1,0,0,0,2,0,0,0, a, 0,0,0
    Imei Repair Command: No Need
    Note: After Patch Flash, User have to Enter "Unlock Command" from "Dc Unlocker" & then Update Firmware to which has in Modem before Erase.



    Model: E5573cs-609
    Supported Ver: 21.323.00.00.274
    Test Point: Yes
    Erase: Yes
    Patch Flash: Yes
    Unlock Command: at^nvwrex=8268,0,12,1,0,0,0,2,0,0,0, a, 0,0,0
    Imei Repair Command: No Need
    Note: After Patch Flash, User have to Enter "Unlock Command" from "Dc Unlocker" & then Update Firmware to which has in Modem before Erase.



    Model: E8372H-608
    Supported Ver: 21.316.01.01.274
    Test Point: Yes
    Erase: Yes
    Patch Flash: Yes
    Unlock Command: at^nvwrex=8268,0,12,1,0,0,0,2,0,0,0, a, 0,0,0
    Imei Repair Command: No Need
    Note: After Patch Flash, User have to Enter "Unlock Command" from "Dc Unlocker" & then Update Firmware to which has in Modem before Erase.



    Model: E8372H-608
    Supported Ver: 21.316.01.02.274
    Test Point: Yes
    Erase: Yes
    Patch Flash: Yes
    Unlock Command: at^nvwrex=8268,0,12,1,0,0,0,2,0,0,0, a, 0,0,0
    Imei Repair Command: No Need
    Note: After Patch Flash, User have to Enter "Unlock Command" from "Dc Unlocker" & then Update Firmware to which has in Modem before Erase.



    Model: E8372H-608
    Supported Ver: 21.316.01.03.274
    Test Point: Yes
    Erase: Yes
    Patch Flash: Yes
    Unlock Command: at^nvwrex=8268,0,12,1,0,0,0,2,0,0,0, a, 0,0,0
    Imei Repair Command: No Need
    Note: After Patch Flash, User have to Enter "Unlock Command" from "Dc Unlocker" & then Update Firmware to which has in Modem before Erase.



    Model: E8372H-608
    Supported Ver: 21.316.01.04.274
    Test Point: Yes
    Erase: Yes
    Patch Flash: Yes
    Unlock Command: No Need
    Imei Repair Command: "at^nvwrex=0,0,16,X X X X X X X X X X X X X X X 0"
    Note: After Patch Flash, User have to Enter "Repar Imei Command" from "Dc Unlocker" & open Home Page of Modem and write New "Wifi Name"



    Model: E5573cs-322
    Supported Ver: 21.318.xx.xx.306
    Test Point: Yes
    Erase: Yes
    Patch Flash: Yes
    Unlock Command: No Need
    Imei Repair Command: "at^nvwrex=0,0,16,X X X X X X X X X X X X X X X 0"
    Note: After Patch Flash, User have to Enter "Repar Imei Command" from "Dc Unlocker" & open Home Page of Modem and write New "Wifi Name"



    Model: E5573cs-322
    Supported Ver: 21.323.xx.xx.306
    Test Point: Yes
    Erase: Yes
    Patch Flash: Yes
    Unlock Command: No Need
    Imei Repair Command: "at^nvwrex=0,0,16,X X X X X X X X X X X X X X X 0"
    Note: After Patch Flash, User have to Enter "Repar Imei Command" from "Dc Unlocker" & open Home Page of Modem and write New "Wifi Name"



    Model: E8372h-153
    Supported Ver: 21.313.xx.xx.306
    Test Point: YES
    Erase: Yes
    Patch Flash: Yes
    Unlock Command: at^nvwrex=8268,0,12,1,0,0,0,2,0,0,0, a, 0,0,0
    Imei Repair Command: No Need
    Note: After Patch Flash, User have to Enter "Unlock Command" from "Dc Unlocker" & Update Firmware to which has in modem.



    Model: E8372h-153
    Supported Ver: 21.318.xx.xx.306
    Test Point: Yes
    Erase: Yes
    Patch Flash: Yes
    Unlock Command: No Need
    Imei Repair Command: "at^nvwrex=0,0,16,X X X X X X X X X X X X X X X 0"
    Note: After Patch Flash, User have to Enter "Repar Imei Command" from "Dc Unlocker" & open Home Page of Modem and write New "Wifi Name"



    Model: E8372h-153
    Supported Ver: 21.321.xx.xx.306
    Test Point: Yes
    Erase: Yes
    Patch Flash: Yes
    Unlock Command: No Need
    Imei Repair Command: "at^nvwrex=0,0,16,X X X X X X X X X X X X X X X 0"
    Note: After Patch Flash, User have to Enter "Repar Imei Command" from "Dc Unlocker" & open Home Page of Modem and write New "Wifi Name"



    Model: E5573s-320
    Supported Ver: 21.315.01.00.306
    Test Point: No
    Erase: No
    Patch Flash: Yes
    Unlock Command: at^nvwrex=8268,0,12,1,0,0,0,2,0,0,0, a, 0,0,0
    Imei Repair Command: No Need
    Note: After Patch Flash, User have to Enter "Unlock Command" from "Dc Unlocker" & Update Firmware to which has in modem.



    Model: E5573s-320
    Supported Ver: 21.315.01.01.306
    Test Point: Yes
    Erase: Yes
    Patch Flash: Yes
    Unlock Command: at^nvwrex=8268,0,12,1,0,0,0,2,0,0,0, a, 0,0,0
    Imei Repair Command: No Need
    Note: After Patch Flash, User have to Enter "Unlock Command" from "Dc Unlocker" & Update Firmware to which has in modem.
    [свернуть]


    Скачать

  10. Пользователь сказал cпасибо:
    roman66 (15.10.2017)
  11. #6
    Пользователь
    Флаг страны для Бахтияр
    Аватар для Бахтияр
    Бахтияр

    Регистрация
    05.06.2017
    Возраст
    37
    Сообщений
    263
    Сказал(а) спасибо
    94
    Поблагодарили 366 раз(а) в сообщениях
    Вес репутации
    29
    VolcanoBox Inferno MTK 1.4.2 Hot MTK6570 FRP, IMEI Repair, Screen Lock & Much More
    What's new in VolcanoBox Inferno MTK 1.4.2 ?
    Added World's 1st & Very Exclusive, Only In Inferno Added Full Support for

    MTK 6570 EMMC
    Successfully MTK6570 FRP Remove by Inferno MTK !!


    Код:
    >>Current Task:
              USB Clear FRP(EMMC)
    >> 
    >>HIGH BOOT
    >>
    >>Operation:
              1. Power off the phone.
              2. Please insert USB cable within 40 seconds.
    >> 
    >>PreLoader USB VCOM Port (COM9)
    >> 
    >>Connecting...
    >>CPU TYPE:MT6570
    >>Hardware version:CA00
    >>Software version:0000
    >>Boot downloading complete!
    >>EMMC_ID:0x90014a483447326111
    >>EMMC_PRODUCT_NAME: JH4G2a
    >>EMMC_BOOT1_SIZE:0x400000
    >>EMMC_BOOT2_SIZE:0x400000
    >>EMMC_PRMB_SIZE:0x400000
    >>EMMC_GP1_SIZE:0x0
    >>EMMC_GP2_SIZE:0x0
    >>EMMC_GP3_SIZE:0x0
    >>EMMC_GP4_SIZE:0x0
    >>EMMC_USER_SIZE:0xe9000000(3.64G)
    >>Find partition success.
    >>Clear FRP successfully!
    World's 1st & Exclusively Added MT6570 EMMC Remove FRP
    All other Tools are not Supported.
    All other Tools shown MT633 & MT0633
    All other Tools Shows it's as " MT633 "
    All other tools Detect MTK6570 like this...


    Код:
     BB_CPU_PID : 0633
     BB_CPU_NME : [MediaTek] MTxxx
    Скачать

  12. Пользователь сказал cпасибо:
    roman66 (12.11.2017)

Информация о теме

Пользователи, просматривающие эту тему

Эту тему просматривают: 1 (пользователей: 0 , гостей: 1)

Социальные закладки

Социальные закладки

Ваши права

  • Вы не можете создавать новые темы
  • Вы не можете отвечать в темах
  • Вы не можете прикреплять вложения
  • Вы не можете редактировать свои сообщения
  •